Fiat
specification
product code FAR2.SM1
camshafts
1 x FAR2.096.258S.A
1 x FAR.092.258S.S
use Road medium
In/Ex cam lift 9.6 / 9.2
total degrees 258° / 258°
distribution phase 16° - 62° / 45° - 33°
lobe center 113° / 96°
lift at TDC In/Ex 0.3 / 1.3
valve clearance punt idrauliche / punt idrauliche
with opened phase variator
distribution phase 41° - 37° / 45° - 33°
lobe center 96° / 96°
lift at TDC In/Exalzata PMS ASP/SCA 2.6 / 1.3
price
€ 830,00 + VAT
the price is referred at the couple of product and is without VAT and transport FEE
Fiat : 1800 16v with phase variator
The road profiles offer a good compromise between the various daily use needs of an automotive engine: regular minimum, good torque at a low rpm, low exhaust emissions and a significant increase in maximum power.
The profiles for racing use offer a substantial increase in power at high rpm, guaranteeing typical performance of a racing vehicle.
Some of the parameters on which action is taken to improve the performance of an internal combustion engine through camshafts with a new profile are the increase in the lift of the valves, the increase in the crossing values of the exhaust and intake valves and the duration of the cylinder filling phase. Through a correct design of a profile from the correct mix of these parameters, an improvement of the engine performance in relation to its use is obtained.
specific note for the product
- For installation use the specific C&B tools
- HPMS with closed and open variator
